![Towerpro 40a esc manual](https://kumkoniak.com/26.jpg)
![Towerpro 40a esc manual Towerpro 40a esc manual](http://www.aeromodelitis.com/images/HK-SS40A.jpg)
SBEC (Switching Battery Eliminator Circuit) uses an efficient switching regulator to step down the voltage and doesn't convert the difference in voltage to wasted heat. Due to this inefficiency, our ESCs use an SBEC/UBEC, which is a more efficient BEC, as explained below. The higher the battery voltage, the more heat generated and the less effective the BEC is. Since these components use a lower voltage (5v) than the ESCs input voltage, standard BECs use a linear regulator that steps down voltage by converting the voltage into heat. BEC: stand for "Battery Eliminator Circuit" A BEC is an extra circuit in the ESC that eliminates the need to power receivers and servos with another battery. *Size and weight are for reference and may vary
- The ESC beeps during start up to confirm the number of battery cells..
- It can be used in model airplanes, drones, helicopters, boats, cars, and other applications where a brushless motor needs to be controlled.
-
It can be programmed via the transmitter or using our Programming Card (Sold separately).Low Voltage Protection - If the battery voltage drops below the programmed threshold, the ESC will either shut off or reduce throttle, depending on the programmed setting..Lost Signal protection - When signal is lost the ESC cuts the motor's power to prevent a runaway object.Overheat Protection - Output power reduces to 40% when over 100☌ (212☏).
Safe Start Protection - The ESC will not power the motor on start up unless the throttle is in the minimum throttle position to prevent dangerous accidental start ups.Start up Protection - The ESC will stop powering the motor if it detects the motor is unable to spin after start up.Built-in Safety Features: See the ESC Safety Features and Protections section for more information for each safety feature.See Product Specifications for more information. Integrated SBEC/UBEC provides high current efficiency with minimal heat loss compared to a standard BEC.Quick, linear, and stable throttle response that maintains a constant motor speed.See First-time Use - Throttle Range Calibrationfor more information. Calibrate starting motor throttle position.Reduces electromagnetic interference signal input using a toroidal ferromagnetic core (green donut with the signal wire wrapped through it).Uses a powerful high-performance microcontroller processor, which provides several of the listed features.See How to Change the ESC's Settings (Programming) and Programmable Settings for more information.
Programmable settings that adapt to your needs.